The HP202-HGX pump is a light weight, self-priming, engine driven pump supplied ready to operate complete with hose fittings and suction strainer.
Specifications:
- 5.5HP (4.1kW)
- Max Flow rate: 300 LPM
- Max Pressure: 113 psi
- Self Priming: 6m Suction
- Max discharge head: 80 meters
- Inlet 2 inch (50mm)
- Outlet sizes 1.5 inch (40mm)
- Liquid temperature range: 2 - 35 deg C
- Maximum ambient temperature: 40 deg C
- Max operating pressure: 6 bar
- Package dimensions: 420 x 420 x 410
Common Applications:
- General water transfer
- Equipment washdown
- Firefighting
- De-watering flooded areas
- Filling water trucks
Features:
- Honda GX200 4.1 kW (5.5HP) single cylinder, four stroke air cooled
- Comes with 600ml of 15W/40
- Easy to start and simple to operate
- Starting system: Recoil
- Maximum Engine Revs: 3600rpm
- Self priming for ease of use
- Cast iron head with cast iron impeller and volute
- Mechanical Seal: Carbon/Ceramic/Nitrile
- O rings and gaskets: Nitrile
- 3.1L fuel tank
- Run time per tank: 2-3 hours
- Engine oil capacity 600ml
- Heavy duty roll frame with rubber feet
- Low oil cut out system will prevent the engine from seizing should the pump tip over while running or run low on engine oil
- Weight 28Kg
**We recommend a Hansen foot valve with a hose tail to be connected to the suction pipe.
12 Months Warranty
