The PC Auto pump controller with built-in pressure transducer is used to automatically control the functioning of electric water pumps. It has two modes – Automatic and Manual. In Automatic mode the control unit calculates the start pressure to be 55% of the pumps turn off pressure. In manual mode you can manually select the start pressure between .5 bar and 3.5 bar.
Features
- Automatic control of pump operation and shutdown
- Stop pumping automatically in case of water shortage
- Will start automatically after power failure.
- Manual mandatory start-up
- Over-pressure protection, if the system pressure is more than 10 bar, the pump automatically stops the pump from working.
- Water shortage self-start, the time interval of self-start is 1 minute, 30 minutes, 1 hour, and then 1 hour cycle.
- Anti-seize function causes the pump to turn on at least once every 48 hours.
- LED Display.
Technical Features
- Start-up pressure range: 0.5-6.0 bar (0.5-3.5 bar in normal mode, 0.5-6 bar in automatic mode)
- Maximum rated current: 16A
- Maximum power: 2.2kW
- Permissible maximum pressure: 10 bar
- Rated voltage: 220V
- Frequency: 50Hz
- Maximum ambient temperature: 40°C
- Maximum Medium Temperature: 60°C
- Protection Level: IP65
Model | Start Pressure | Inlet/Outlet | Phase | Voltage |
PC-AUTO | 0.5-6.0 Bar | 25mm | 1 | 220-240 |